Coils
There are different structures and methods of coil winding according to capacity, volume and its usage. LS has applied the optimal coil winding obtained through years of research and development. The size of the conductor has been designed to tolerate allowable currents, temperature increase, and the electromagnetic force that occurs in case of external short-circuit. The concentric arrangement that inserts primary and secondary coils based on the core is the standard method of arrangement with the insulation classification and mechanical force taken into account.
Cores
The iron core is made of sophisticated highly permeable magnetic silicon steel laminated with no secular variations and is designed to minimize the vibration and noise during operation by minimizing no-load current and loss through precision cutting processes. The junction between Leg and Yoke Core has been manipulated through precision processing of 45℃ to take advantage of directivity of rolling and has also underwent the annealing process at 800℃ to eliminate magnetic properties.
Tank
Being made of cold rolled steel, the tank is able to endure internal pressure, and it was also designed and manufactured with a harnessed mechanical force to prevent any deformation caused by external shocks while transportation or other factors.
Conservator
The conservator and external cover of the transformer are connected through a suitable pipe with an oil gauge attached to it. In addition, the conveyor and the case are detachable, if needed, as they are assembled by bolts.
